STRAP CHANGE & CARE
تبديل الحزام والعناية
Every Saiph strap and bracelet fits quick-release spring bars — no tools, no scratches, thirty seconds. Watch the film, or follow the steps below.
FILM — COMING SOON
Removing a strap
نزع الحزام
- Lay the watch face-down on a soft cloth. The underside of each strap, near the case, has a small quick-release lever on the spring bar.
- Slide the lever toward the centre of the strap. The spring bar retracts and one end comes free of the case.
- Angle the strap out. With the lever still held, tilt the strap away from the case and lift it clear. Repeat on the other side.
Fitting a strap
تركيب الحزام
- Seat one end of the spring bar in the hole on the inside of one lug, with the lever facing the case back.
- Slide the lever, lower the other end into place, and release. You'll feel it click home.
- Give the strap a firm tug. If it holds, it's seated. If it shifts, release and reseat it — never wear a strap that hasn't clicked in.
Your Saiph takes any 20 mm strap. Ours are made for it — but the lugs don't discriminate.
Caring for your Saiph
العناية بساعتك
- Water. Rated to 10 ATM (100 m) — swimming is fine; diving with tanks is not. Rinse briefly in fresh water after the sea, and keep leather straps out of the water altogether — that's what the bracelet is for.
- The movement. Your Saiph is automatic — it winds itself as you wear it. Worn daily, it never stops. If it does stop, wind the crown gently about forty turns and set the time; it will take care of the rest.
- Magnets. Keep the watch away from strong magnets — speakers, laptop closures, magnetic clasps. If it starts running noticeably fast, it may be magnetised; write to us and we'll advise.
- The finish. A soft, dry cloth is all the case and bracelet ever need. Nothing abrasive, ever.
Questions, or a guarantee claim? Write to
care@saiph.watch with your serial number — a person answers, not a system.